If you've got a wooden ring, you may want to keep it out of the shower. However, this can lead to a variety of problems. Not only will the water ruin the material, it can also cause the ring to slip off your finger. Even worse, a wet ring can irritate your skin.
Keeping a Wooden Ring in Pristine Condition
Wooden rings require a special care and maintenance regimen. The ring will need to be sanitized regularly and a fresh coat of finish will protect it and polish off any nicks. It is also important to consider its origins, as some rings are made from endangered species of trees.
A wooden ring with a natural finish should be treated with oil. This oil will penetrate the wood and make its colors more vibrant. To apply the oil, use a clean cloth to apply it to all surfaces of the ring. Once it has been applied, allow the ring to dry. The finish may also rub off occasionally, even with the best product.
When cleaning a wooden ring, you should always remember that it is not waterproof. If submerged for extended periods, the ring will suffer water damage. This means that you should take it out before you engage in any water activity. While this may be the best practice, some people choose not to remove the ring. Hard knocks and bumps may result in damage to the wooden ring. The impact can chip the wood and cause scratches and dents. Moreover, you should avoid the use of harsh chemicals on it, as they can damage the wood.
Keeping a Wooden Ring Out of the Shower
Wooden rings are susceptible to water damage. The best way to keep your wooden ring in good condition is to avoid prolonged exposure to water. Hand washing and an occasional shower are fine, but don't let your ring immersed in water for long. It will also be damaged by harsh chemicals, such as hand lotion.
To protect your wooden ring, consider adding a veneer layer. You can wrap a thin strip of wood veneer around the base of the ring and glue it to it. This way, you can prevent your wooden ring from being damaged in the shower.
Keeping a Wooden Ring Out of the Car
Wooden rings are beautiful, comfortable to wear, and unique. While most people have questions about the durability of wooden rings, there is no need to worry. If taken care of properly, a wooden ring can last for decades. In addition, wood is a softer material than metal, so it won't break easily.
The most time-consuming part of the process is shaping the wood ring. The first step is to bevel the corners of the ring. This makes it easier to slide on and off. The next step is sanding it. Use medium and high-grit sandpaper to sand the edges. Once you are done sanding, test the fit to ensure it fits perfectly.
Another step to care for your wooden ring is to avoid it from getting dirty. Use rubber gloves to avoid rubbing the ring with your fingers. If you do need to use any household cleaning products or hand sanitizer, be sure to remove the ring before using the product. Then, wait for it to dry before applying the ring again.
Getting a Wooden Ring Wet in a Shower
If you own a wooden ring, you should avoid getting it wet in the shower. While it may be waterproof, the water will still penetrate and break down the wood. Also, the oils that are present on your hands will be absorbed into the wood. Unless your ring is made of metal, it is important to dry it thoroughly after getting it wet.
It is best to clean your wooden ring with a paper towel or cloth and let it dry for at least 20 minutes. If you don't have a paper towel or cloth, you can use olive oil to restore the wooden finish. The oil will not make your wooden ring glossy, but it will leave it with a nice natural look. Beeswax is also an excellent choice for finishing wood rings, although you need to apply it on a regular basis. Keeping your ring clean is important, but it is also important to make sure that you don't expose it to harsh chemicals.
